Phone:
+86-137-7507-2971
| Quantity: | |
|---|---|
| PDF Export | |
The HALANSM 220892 is the 130A Air nozzle for Hypertherm MAXPRO200 and HSD130 plasma torches — the Air-bore counterpart to 220893 (130A O₂). Bore optimized for Air cutting on MS/SS/AL at mid-plate thickness. Sits in the 220487+220488+220892+220536+220935/220936 stack on MAXPRO200/HSD130 barrels. Does NOT fit HyPro2000 for MAX200 130A barrel (uses 220539 noz + 220620 shield, different seat) nor MAX200 standard barrels. Buyer arriving via "HyPro2000 for MAX200" grouping should confirm torch badge reads "MAXPRO200" or "HSD130" — if "HyPro2000 for MAX200", correct 130A noz is 220539.
220892
HALANSM®
HLN-220892
Nozzle 220892 / 130A Air Nozzle for MAXPRO200 & HSD130 – HALANSM
220892 is Hypertherm's 130A Air nozzle for the MAXPRO200 and HSD130 torch families — the Air-bore counterpart to 220893 (130A O₂). Bore geometry tuned for compressed air cutting on mild steel, stainless, and aluminum at mid-plate thickness. Swap noz by gas, rest of the 130A stack stays (elec/swirl/shield/caps shared between Air and O₂).
220892 in MAXPRO200/HSD130 130A Air stack
Pos | Part | Ref |
|---|---|---|
Electrode | 220487 (130A, Hf) | 220487 |
Swirl | 220488 (130A/200A shared ceramic) | 220488 |
Nozzle | 220892 (130A Air) | 220892 |
Shield | 220536 (130A) | 220536 |
Inner Cap | 220935 | 220935 |
Outer Cap | 220936 | 220936 |
Key Points (buyer-facing)
220892 vs 220893, same amp different gas: Both 130A on MAXPRO200/HSD130, same stack mates except nozzle. 220892 = Air bore (MS/SS/AL general), 220893 = O₂ bore (MS O₂ faster pierce). Running 220892 on O₂ = premature tip wear; running 220893 on Air = acceptable but over-spec.
NOT HyPro2000 for MAX200 130A: If buyer arrived via "HyPro2000 for MAX200" grouping — HyPro2000 130A runs 220539 noz + 220620 shield (different barrel seat, shield number also differs: HyPro 130A = 220620, MAXPRO200/HSD130 130A = 220536). 220892 belongs on MAXPRO200/HSD130 barrels, not HyPro2000. Torch badge must read "MAXPRO200" or "HSD130" for 220892; "HyPro2000 for MAX200" → 130A noz = 220539.
Correction note: This SKU (220892) is a Nozzle, not an electrode. The 130A electrode on MAXPRO200/HSD130 is 220487. Prior drafts that labeled 220892 as "Electrode" were incorrect — if published, amend #2/#3/#7/#9/#10 to "Nozzle" throughout.
NOTE: MAXPRO200/HSD130 130A vs 200A on same hosts: 130A = 220487+220488+220892/220893+220536; 200A = 220937+220488+220542+220627; swirl 220488 shared, caps 220935+220936 shared, elec/noz/shield swap by amp. Plain "MAX200" (no HyPro, no MAXPRO) is a different host family entirely (020x/120x consumables), not cross-compatible with 2209xx.
Real Shot: Images 1–11 above show the actual HALANSM torch ceramic head, Euro connector pins, cable coil, consumable-installed view and length comparison you will receive.
Download the complete product brochure：
