The HALANSM 10 x 15 cm lens cleaning paper is an ultra-soft, lint-free tissue made for delicate optical surfaces. One booklet gives you 100 single-use sheets sized to cover a standard laser protective window or camera front element in one clean, non-overlapping circular pass.
It is built for fiber laser cutting heads, handheld welding heads, marking machines, optical instruments and precision lenses — anywhere a single fiber left on the glass turns into carbon under the beam. Use it dry, or fold it around a drop of IPA or analytical-grade acetone for coated optics.
Key Advantages
Benefit
Why it matters
Lint-free, no fiber shed
Ordinary tissue leaves short fibers that carbonize on the coating under laser irradiation — this paper is made to leave nothing behind.
Non-abrasive, ultra-soft
Safe for AR, HR and DLC coatings on fused silica, glass and quartz surfaces.
No residue, static-dissipative
Low extractables and self-dissipating static reduce re-attraction of dust after wiping.
10 x 15 cm single sheet
One sheet completes one full clean — no folding waste, no second sheet cross-contamination.
100 sheets per book
Booklet format with tear-off pages; sealed against moisture and shop-floor dust.
Specifications
Item
Value
Product name
Advanced Lens Cleaning Paper
Sheet size
10 x 15 cm (100 x 150 mm)
Sheets per book
100 sheets
Material
Premium soft tissue, lint-free, silicone-free
Color
White
Thickness
Approx. 0.04 mm (typical for Grade 310-equivalent tissue)
Packaging
Booklet with tear-off pages; sealed moisture-proof pack
Sterility
Non-sterile
Reusability
Single use
Note: sheet count per book and pack quantity follow the 100 sheets/book industry convention confirmed across multiple suppliers; confirm exact count and MOQ with your HALANSM sales contact before ordering.
One sheet covers the full aperture without overlap
Small optics, eyepieces, sensor filters
10 x 15 cm folded to 5 x 7.5 cm
Smaller contact area, less waste
Workstation and cutting-head exterior
General lint-free wipe or microfiber cloth
Reserve this paper for the optics themselves
Rule of thumb: use a fresh sheet for every cleaning session. Once a sheet has touched a coated surface, it carries particles — reuse means scratches.
How to Use
1. Blow or brush loose dust off the optical surface before wiping — never start dry with grit on the glass.
2. Tear off one sheet along the perforation. Do not reuse a sheet that has already touched a surface.
3. For dry cleaning, fold the sheet once and wipe in a gentle circular motion from center to edge.
4. For coated optics, dampen (do not soak) a folded sheet with 99%+ IPA or analytical-grade acetone and finish with a dry sheet.
5. Discard the sheet immediately after use; never lay it back on the workbench.
Frequently Asked Questions
Is this paper safe for coated laser lenses?
Yes. It is lint-free, silicone-free and non-abrasive, suitable for AR-, HR- and DLC-coated fused silica and glass optics. Always use a fresh sheet and confirm solvent compatibility with your lens coating first.
What size is each sheet?
Each sheet is 10 x 15 cm (100 x 150 mm), the standard optical-cleaning format. One sheet is enough for one complete, non-overlapping circular wipe on a typical protective window or camera front element.
Can I use it on a CO2 laser ZnSe lens?
Yes, but never dry-wipe a ZnSe lens — dampen the sheet with IPA and avoid static. ZnSe is soft (Mohs ~3) and scratches easily, so use light pressure and a fresh sheet.
How many sheets come in one book?
100 sheets per book, in a sealed, tear-off booklet. This follows the industry-standard 100-sheet/book convention; confirm exact count with your HALANSM contact before bulk ordering.
Why not just use a paper towel or cotton cloth?
Shop rags and paper towels shed uncontrolled fibers and may carry chemical residues. Under laser irradiation those fibers carbonize and bond permanently to the coating — equivalent to sanding the mirror. This tissue is made specifically to leave nothing behind.
How should I store it?
Keep the booklet sealed until use, in a dry place away from coolant mist and abrasive dust. Once opened, use within the pack's stated shelf life; discard if the paper shows moisture or discoloration.
Changzhou Halan Machinery Technology Co., Ltd. focuses on high-quality plasma cutting and welding consumables. We have wide range of Plasma consumable accessories those are made by high grade of material and made by latest method with technology.
